Upgrade or replace your motorcycle handlebar controls with this set of left and right handlebar switches. Designed to operate essential electrical functions, these switches provide convenient control of the horn, turn signals, headlights, electric starter and engine kill switch.
Featuring a compact design and a sleek black finish, they are suitable for various motorcycle styles. Designed for 7/8" (22 mm) handlebars, they offer a practical replacement solution for worn or damaged handlebar controls.
Material: PVC and ABS
Color: Black
Rated Voltage: 12V DC
Handlebar Mounting Diameter: 7/8" (22 mm)
Wire Length: 47 cm (1.54 ft)
Design: Compact and waterproof
Compatibility: Universal, subject to wiring and electrical connection compatibility.
Left Handlebar Switch:
High and low beam control
Headlight passing switch
Left and right turn signals
Horn control
Brake light control
Right Handlebar Switch:
Engine kill switch
Electric starter control
Headlight control
Position light control
Brake light control
Right Handlebar Switch
| Wire Color | Function |
|---|---|
| Black/White | Kill switch terminal, 12V power input |
| Green | Kill switch terminal |
| Red/White | Headlight and starter 12V power input |
| Yellow | Position light |
| Yellow/Red | Headlight |
| Yellow/Green | Starter terminal |
| Black | Brake light |
Left Handlebar Switch
| Wire Color | Function |
|---|---|
| Yellow/Red | Dimmer switch 12V power input |
| Blue | High beam |
| Light Blue | Low beam |
| Red/White | Passing light |
| Orange | Turn signal 12V power input |
| Yellow/Green | Right turn signal terminal |
| Brown/White | Left turn signal terminal |
| Black | Brake light and horn 12V power input |
| Green/Red | Brake light terminal |
| Brown | Horn terminal |
Depending on the selected option:
1 × Motorcycle Handlebar Switch (Left Side – Horn)
OR
1 × Motorcycle Handlebar Switch (Right Side – Starter and Kill Switch)
Please note: These are two separate purchasing options. Make sure to select the correct version before placing your order.
Before installation, check the wire color assignments, electrical functions and connectors against your motorcycle's original wiring harness. Wiring configurations may vary depending on the motorcycle model and manufacturer. Testing with a multimeter is recommended before making any electrical connections.